+48 (0)62 740 41 50    info@blastrac.pl   

Blastrac Śrut


  • Śrut

Śrut


Abrasive
CodeHardnessDescription
999-033045-52 HRC
  • Steel shot
  • Size: 0,85 - 1,40 mm
  • It is used to achieve a fine to medium texture on concrete or to remove the glaze from tiles, so that, for example, slip-resistant seals can then be applied. Also for blasting old penetrative treatments, seals and coatings with a thickness of about 1mm.
  • Abrasive


    Abrasive
    CodeHardnessDescription
    999-039045-52 HRC
  • Size: 1,00 - 1,70 mm
  • Steel shot
  • Standard abrasive, suitable for about 50 - 60% of all applications. It is used to remove concrete slurries from new concrete, to roughen concretes which are too smooth or to roughen natural stones, to blast coatings with a thickness of 1- 3 mm and to clean steel. It produces a medium profile on concrete.
  • Abrasive


    Abrasive
    CodeHardnessDescription
    999-046045-52 HRC
  • Size: 1,18 - 2,00 mm
  • Steel shot
  • It is used predominantly in the concrete and asphalt sector, for roughing up and for blasting thicker coatings. It produces a medium-rough to rough profile on concrete and a medium profile on asphalt owing to the higher operating speed.
  • Abrasive


    Abrasive
    CodeHardnessDescription
    999-055045-52 HRC
  • Steel shot
  • Size: 1,40 – 2,00 mm
  • It is used predominantly in the concrete and asphalt sector, for roughing up and for blasting thicker coatings. It produces a rough profile on concrete and a rough profile on asphalt owing to the higher operating speed.
  • Abrasive


    Abrasive
    CodeHardnessDescription
    999-001645-52 HRC
  • Steel grit
  • Size: 1,18 - 1,70 mm
  • Blastrac steel angular grit is predominantly used to profile and / or creating adhesion (anchor pattern) on steel surfaces. Due to the characteristics of the steel abrasives it can be advisable to use it by removal of paint, rust, coating, antiskid and other contaminations onto steel surfaces.
  • Abrasive


    Abrasive
    CodeHardnessDescription
    999-002545-52 HRC
  • Size: 0,71 - 1,18 mm
  • Steel grit
  • It is used predominantly in the concrete and asphalt sector, for roughing up and for blasting thicker coatings. It produces a rough profile on concrete and a rough profile on asphalt owing to the higher operating speed.
  • Copyright 2018 Blastrac BV | Home | Sitemap | Newsletter | Polityce prywatności